Lenze Inverter ESMD113C2TXA Manual

The Lenze Inverter ESMD113C2TXA is a versatile drive designed for controlling electric motors in various applications. It features advanced control algorithms, a user-friendly interface, and robust communication options. This manual provides essential information on safety, installation, configuration, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, integrated control panel, multiple communication interfaces, and high efficiency.

Feature	Description
Compact Design	Space-saving design for easy installation.
Integrated Control Panel	User-friendly interface for easy operation.
Multiple Communication Interfaces	Supports various protocols for integration.
High Efficiency	Optimized for energy savings and performance.

Installation

Ensure proper installation for optimal performance. Follow the steps below:

Mount the inverter securely in a well-ventilated area.
Connect the power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Power on the inverter and check for proper operation.

WARNING! Ensure the inverter is properly grounded to avoid electrical hazards.

Configuration

Configure the inverter settings using the integrated control panel:

Access the configuration menu by pressing the MENU button.
Set the motor parameters such as voltage and frequency.
Adjust the acceleration and deceleration settings as needed.
Save the configuration and exit the menu.

CAUTION! Incorrect settings may lead to motor damage.

Specifications

Input Voltage: 230V AC.
Output Power: 1.1 kW.
Control Method: V/f control.
Operating Temperature: -10°C to 40°C.
Protection Class: IP20.

Controls and Settings

Access settings via the control panel:

Buttons: START, STOP, MENU, UP, DOWN.

Settings include motor parameters, operational modes, and fault diagnostics.

Connecting to Power

Follow these steps to connect the inverter to power:

Ensure the power supply is turned off.
Connect the input power cables to the designated terminals.
Verify all connections are secure.
Turn on the power supply and check for proper operation.

Tip: Always use appropriate safety gear when handling electrical components.

Operating the Inverter

To operate the inverter:

Press the START button to begin operation.
Monitor the display for operational status.
Use the UP and DOWN buttons to adjust speed settings.
Press STOP to halt operation safely.

WARNING! Do not operate the inverter without proper load connected.

Maintenance

Regular maintenance is essential for longevity:

Inspect connections and wiring periodically.
Clean the inverter casing to prevent dust buildup.
Check for any signs of wear or damage.

CAUTION! Always disconnect power before performing maintenance.

Regulatory Information

This inverter complies with relevant safety and performance standards. For detailed information, refer to the product certification documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	No power supply	Check power connections and supply.
Error code displayed	Fault in configuration	Refer to the error code guide in the manual.
Motor not running	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.

Reset: Use the reset function in the menu if necessary.

Service: For support, contact Lenze customer service.