Lenze Inverter AC Tech SMVector ESV153 2T Series Manual

The Lenze Inverter AC Tech SMVector ESV153 2T Series is designed for high-performance motor control applications. It features advanced control algorithms, a user-friendly interface, and robust communication options. This manual provides essential information on safety, installation, setup, operation, and troubleshooting for optimal use of the inverter.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key features include: advanced vector control, built-in safety features, customizable parameters, and multiple communication protocols.

Feature	Description
Advanced Vector Control	Provides precise motor control for various applications.
Built-in Safety Features	Includes overvoltage, undervoltage, and overcurrent protection.
Customizable Parameters	Allows users to adjust settings for specific applications.
Communication Protocols	Supports various protocols for integration with other systems.
Compact Design	Space-saving design suitable for various installations.

Installation

Ensure proper installation for optimal performance. Follow these steps:

Mount the inverter securely in a well-ventilated area.
Connect power supply according to the wiring diagram.
Ensure all connections are tight and secure.
Perform a visual inspection before powering on.

WARNING! Ensure power is off during installation to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select motor type and parameters.
Set operational limits and safety parameters.
Test run the motor to ensure proper configuration.

CAUTION! Double-check all settings before starting the motor.

Specifications

Input Voltage: 200-240V AC.
Output Voltage: 0-240V AC.
Power Range: Up to 15 HP.
Control Method: Vector control.
Communication: RS485, CANopen options available.
Operating Temperature: -10°C to 50°C.

Controls and Settings

The inverter features a user-friendly interface with an LCD display for easy navigation.

Key Controls: Start/Stop, Parameter settings, Fault reset, and Monitoring options.

Connecting Devices

Follow these guidelines for connecting external devices:

Ensure power is off before making connections.
Connect motor leads to the inverter output terminals.
Connect control signals as per the wiring diagram.

Tip: Use shielded cables for signal connections to reduce interference.

Operating the Inverter

To operate the inverter, follow these steps:

Power on the inverter.
Select the desired operational mode.
Start the motor using the Start button.
Monitor performance via the LCD display.

WARNING! Do not exceed the rated limits of the inverter.

Maintenance

Regular maintenance is essential for optimal performance:

Inspect connections and wiring regularly.
Keep the inverter clean and free from dust.
Check for any signs of wear or damage.

Regulatory Information

This inverter complies with relevant safety and performance standards. For detailed information, refer to the regulatory documentation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not power on	Power supply issue	Check power connections and fuses.
Motor not running	Incorrect settings	Verify motor parameters and settings.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault code displayed	System error	Refer to the fault code list in the manual.

Reset: Use the reset function in the menu if available.

Service: Contact Lenze support for assistance.