Lenze Inverter 8210 Series Manual

The Lenze Inverter 8210 Series is designed for efficient motor control in various industrial applications. This manual provides essential information regarding safety, features, installation, setup, operation, and troubleshooting of the inverter. The 8210 Series is known for its compact design, high performance, and user-friendly interface.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Inverter 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: User-friendly interface, integrated safety features, multiple communication protocols, and compact design.

Feature	Description
Integrated Safety Features	Includes overcurrent, overvoltage, and thermal protection.
Communication Protocols	Supports various protocols including CANopen and EtherCAT.
Compact Design	Space-saving design suitable for various installations.
User-Friendly Interface	Easy-to-navigate menu for quick adjustments.
Multi-Voltage Support	Compatible with a range of input voltages.

Installation

Ensure proper installation for optimal performance. Follow the steps below:

Mount the inverter securely in a well-ventilated area.
Connect power supply according to specifications.
Wire the motor connections as per the wiring diagram.
Ensure all connections are tight and secure.

WARNING! Ensure power is off before making any connections to avoid electric shock.

First-Time Setup

Power on the inverter and follow the on-screen prompts to configure settings.

Select the motor type and parameters in the setup menu.
Set the desired operating frequency and acceleration/deceleration times.
Save the settings and perform a test run.

CAUTION! Ensure all settings are correct before operating the motor.

Specifications

Input Voltage: 200-240V AC, 380-480V AC.
Output Power: Up to 15 kW.
Control Method: V/f control, vector control.
Operating Temperature: -10°C to +40°C.
Protection Class: IP20.

Controls and Settings

Access settings via the control panel or through external communication interfaces.

Control Panel: Start/Stop, Speed Adjustment, Parameter Settings.

Settings include motor parameters, acceleration/deceleration profiles, and fault diagnostics.

Connecting Devices

Ensure proper connections for optimal performance.

Turn off the inverter and all connected devices before making connections.
Connect the motor and power supply as per the wiring diagram.
Verify all connections before powering on the inverter.

Tip: Use appropriate cables and connectors to avoid signal loss.

Operating the Inverter

Follow the steps below to operate the inverter:

Press the Start button to initiate operation.
Adjust the speed using the control panel.
Monitor the inverter for any fault indications.
Press Stop to halt operation safely.

WARNING! Always monitor the inverter during operation for safety.

Accessibility Features

The inverter includes features for easy accessibility, including a clear display and intuitive controls.

Care & Cleaning

Unplug the inverter before cleaning. Use a dry cloth to wipe the exterior; avoid using liquids.

CAUTION! Do not use abrasive materials that may scratch the surface.

Regulatory Information

Complies with international safety standards. For support, visit the Lenze website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Inverter does not start	Power supply issue	Check power connections and fuses.
Overheating	Poor ventilation	Ensure adequate airflow around the inverter.
Fault indication	Incorrect settings	Review settings and parameters.
Motor not running	Connection issue	Check motor connections and wiring.

Reset: Use the reset function in the menu if available.

Service: Contact Lenze support for further assistance.